Emerson Network Power today announced that it is entering into a significant partnership with IBM to both integrate Emerson’s new Trellis DCIM suite into IBM’s ITSM products as well as to jointly sell Trellis to IBM customers. This partnership has the potential to reshape the DCIM market segment for several reasons:
Connection to enterprise IT — Emerson has sold a lot of chillers, UPS and PDU equipment and has tremendous cachet with facilities types, but they don’t have a lot of people who know how to talk IT. IBM has these people in spades.
IBM can use a DCIM offering — IBM, despite being a huge player in the IT infrastructure and data center space, does not have a DCIM product. Its Maximo product seems to be more of a dressed up asset management product, and this partnership is an acknowledgement of the fact that to build a full-fledged DCIM product would have been both expensive and time-consuming.
IBM adds sales bandwidth — My belief is that the development of the DCIM market has been delivery bandwidth constrained. Market leaders Nlyte, Emerson and Schneider do not have enough people to address the emerging total demand, and the host of smaller players are even further behind. IBM has the potential to massively multiply Emerson’s ability to deliver to the market.
I was part of a Forrester Team that recently completed a multi-country rollout tour with Emerson Network Power as they formally released their Trellis DCIM product, a comprehensive DCIM environment many years in the building. One of the key takeaways was both an affirmation of our fundamental assertions about DCIM, plus hints about its popularity and attraction for potential customers that in some ways expand on the original value proposition we envisioned. Our audiences were in total approximately 500 selected data center users, most current Emerson customers of some sort, plus various partners.
The audiences uniformly supported the fundamental thesis around DCIM – there exists a strong underlying demand for integrated DCIM products, with a strong proximal emphasis on optimizing power and cooling to save opex and avoid the major disruption and capex of new data center capacity. Additionally, the composition of the audiences supported our contention that these tools would have multiple stakeholders in the enterprise. As expected, the groups were heavy with core Infrastructure & Operations types – the people who have to plan, provision and operate the data center infrastructure to deliver the services needed for their company’s operations. What was heartening was the strong minority presence of facilities people, ranging from 10% to 30% of the attendees, along with a sprinkling of corporate finance and real-estate executives. Informal conversations with a number of these people gave us consistent input that they understood the need, and in some cases were formerly tasked by their executives, to work more closely with the I&O group. All expressed the desire for an integrated tool to help with this.
Only a few months since I authored Forrester’s "Market Overview: Data Center Infrastructure Management Solutions," significant changes merit some additional commentary.
The major vendor drama of the “season” is the continued evolution of Schneider and Emerson’s DCIM product rollout. Since Schneider’s worldwide analyst conference in Paris last week, we now have pretty good visibility into both major vendors' strategy and products. In a nutshell, we have two very large players, both with large installed bases of data center customers, and both selling a vision of an integrated modular DCIM framework. More importantly it appears that both vendors can deliver on this promise. That is the good news. The bad news is that their offerings are highly overlapped, and for most potential customers the choice will be a difficult one. My working theory is that whoever has the largest footprint of equipment will have an advantage, and that a lot depends on the relative execution of their field marketing and sales organizations as both companies rush to turn 1000s of salespeople and partners loose on the world with these products. This will be a classic market share play, with the smart strategy being to sacrifice margin for market share, since DCIM solutions have a high probability of pulling through services, and usually involve some annuity revenue stream from support and update fees.
On Monday, February 13, HP announced its next turn of the great wheel for servers with the announcement of its Gen8 family of servers. Interestingly, since the announcement was ahead of Intel’s official announcement of the supporting E5 server CPUs, HP had absolutely nothing to say about the CPUs or performance of these systems. But even if the CPU information had been available, it would have been a sideshow to the main thrust of the Gen8 launch — improving the overall TCO (particularly Opex) of servers by making them more automated, more manageable, and easier to remediate when there is a problem, along with enhancements to storage, data center infrastructure management (DCIM) capabilities, and a fundamental change in the way that services and support are delivered.
With a little more granularity, the major components of the Gen8 server technology announcement included:
Onboard Automation – A suite of capabilities and tools that provide improved agentless local intelligence to allow quicker and lower labor cost provisioning, including faster boot cycles, “one click” firmware updates of single or multiple systems, intelligent and greatly improved boot-time diagnostics, and run-time diagnostics. This is apparently implemented by more powerful onboard management controllers and pre-provisioning a lot of software on built-in flash memory, which is used by the onboard controller. HP claims that the combination of these tools can increase operator productivity by up to 65%. One of the eye-catching features is an iPhone app that will scan a code printed on the server and go back through the Insight Management Environment stack and trigger the appropriate script to provision the server.[i]Possibly a bit of a gimmick, but a cool-looking one.
Data centers, like any other aspect of real estate, follow the age-old adage of “location, location, location,” and if you want to build one that is really efficient in terms of energy consumption as well as possessing all the basics of reliability, you have to be really picky about ambient temperatures, power availability and, if your business is hosting for others rather than just needing one for yourself, potential expansion. If you want to achieve a seeming impossibility – a zero carbon footprint to satisfy increasingly draconian regulatory pressures – you need to be even pickier. In the end, what you need is:
Low ambient temperature to reduce your power requirements for cooling.
Someplace where you can get cheap “green” energy, and lots of it.
A location with adequate network connectivity, both in terms of latency as well as bandwidth, for global business.
A cooperative regulatory environment in a politically stable venue.
I recently published an update on power and cooling in the data center (http://www.forrester.com/go?docid=60817), and as I review it online, I am struck by the combination of old and new. The old – the evolution of semiconductor technology, the increasingly elegant attempts to design systems and components that can be incrementally throttled, and the increasingly sophisticated construction of the actual data centers themselves, with increasing modularity and physical efficiency of power and cooling.
The new is the incredible momentum I see behind Data Center Infrastructure Management software. In a few short years, DCIM solutions have gone from simple aggregated viewing dashboards to complex software that understands tens of thousands of components, collects, filters and analyzes data from thousands of sensors in a data center (a single CRAC may have in excess of 20 sensors, a server over a dozen, etc.) and understands the relationships between components well enough to proactively raise alarms, model potential workload placement and make recommendations about prospective changes.
Of all the technologies reviewed in the document, DCIM offers one of the highest potentials for improving overall efficiency without sacrificing reliability or scalability of the enterprise data center. While the various DCIM suppliers are still experimenting with business models, I think that it is almost essential for any data center operations group that expects significant change, be it growth, shrinkage, migration or a major consolidation or cloud project, to invest in DCIM software. DCIM consumers can expect to see major competitive action among the current suppliers, and there is a strong potential for additional consolidation.