I recently published an update on power and cooling in the data center (http://www.forrester.com/go?docid=60817), and as I review it online, I am struck by the combination of old and new. The old – the evolution of semiconductor technology, the increasingly elegant attempts to design systems and components that can be incrementally throttled, and the increasingly sophisticated construction of the actual data centers themselves, with increasing modularity and physical efficiency of power and cooling.
The new is the incredible momentum I see behind Data Center Infrastructure Management software. In a few short years, DCIM solutions have gone from simple aggregated viewing dashboards to complex software that understands tens of thousands of components, collects, filters and analyzes data from thousands of sensors in a data center (a single CRAC may have in excess of 20 sensors, a server over a dozen, etc.) and understands the relationships between components well enough to proactively raise alarms, model potential workload placement and make recommendations about prospective changes.
Of all the technologies reviewed in the document, DCIM offers one of the highest potentials for improving overall efficiency without sacrificing reliability or scalability of the enterprise data center. While the various DCIM suppliers are still experimenting with business models, I think that it is almost essential for any data center operations group that expects significant change, be it growth, shrinkage, migration or a major consolidation or cloud project, to invest in DCIM software. DCIM consumers can expect to see major competitive action among the current suppliers, and there is a strong potential for additional consolidation.
Security & Risk (S&R) chiefs and Infrastructure & Operations (I&O) leaders have a lot in common, and in great companies, we work in concert to run an efficient, reliable technology infrastructure that keeps critical business assets safe. Much has changed in the world of technology since I pulled my first all-nighter in a data center (falling asleep next to the EMC Symmetrix array was not one of my better ideas – those corners were sharp!), but that partnership is still the same – it takes security engineers and network/server engineers working together to solve really thorny problems.
We have our frictions, of course – I&O pros prioritize operational stability and continuity of service, while S&R pros must occasionally interrupt that continuity to contain security breaches. But when a serious incident (whether security breach or system failure) threatens to sideline our business systems, it falls to us to find and fix the problems – together. We may be organizationally separate now, with I&O reporting into the CIO and the CISO reporting into a COO or Head of Operational Risk, but we share a set of fundamental challenges. We must excel in our own domains (not exactly a cakewalk) but also anticipate and deliver on what our businesses need (much harder).
And what our businesses seek today is growth – in Forrester’s most recent survey of business decision-makers, the top two priorities were growing overall company revenue and acquiring and retaining customers. S&R pros have already worked hard to escape their “Department of No” reputations, and I&O pros have labored tirelessly to get out of the data center and into the business.
I just attended IDF and I’ve got to say, Intel has certainly gotten the cloud message. Almost everything is centered on clouds, from the high-concept keynotes to the presentations on low-level infrastructure, although if you dug deep enough there was content for general old-fashioned data center and I&O professionals. Some highlights:
Chips and processors and low-level hardware
Intel is, after all, a semiconductor foundry, and despite their expertise in design, their true core competitive advantage is their foundry operations – even their competitors grudgingly acknowledge that they can manufacture semiconductors better than anyone else on the planet. As a consequence, showing off new designs and processes is always front and center at IDF, and this year was no exception. Last year it was Sandy Bridge, the 22nm shrink of the 32nm Westmere (although Sandy Bridge also incorporated some significant design improvements). This year it was Ivy Bridge, the 22nm “tick” of the Intel “tick-tock” design cycle. Ivy Bridge is the new 22nm architecture and seems to have inherited Intel’s recent focus on power efficiency, with major improvements beyond the already solid advantages of their 22nm process, including deeper P-States and the ability to actually shut down parts of the chip when it is idle. While they did not discuss the server variants in any detail, the desktop versions will get an entirely new integrated graphics processor which they are obviously hoping will blunt AMD’s resurgence in client systems. On the server side, if I were to guess, I would guess more cores and larger caches, along with increased support for virtualization of I/O beyond what they currently have.
Last year at VMworld I noted Xsigo Systems, a small privately held company at VMworld showing their I/O Director technology, which delivereda subset of HP Virtual Connect or Cisco UCS I/O virtualization capability in a fashion that could be consumed by legacy rack-mount servers from any vendor. I/O Director connects to the server with one or more 10 G Ethernet links, and then splits traffic out into enterprise Ethernet and FC networks. On the server side, the applications, including VMware, see multiple virtual NICs and HBAs courtesy of Xsigo’s proprietary virtual NIC driver.
Controlled via Xsigo’s management console, the server MAC and WWNs can be programmed, and the servers can now connect to multiple external networks with fewer cables and substantially lower costs for NIC and HBA hardware. Virtualized I/O is one of the major transformative developments in emerging data center architecture, and will remain a theme in Forrester’s data center research coverage.
This year at VMworld, Xsigo announced a major expansion of their capabilities – Xsigo Server Fabric, which takes the previous rack-scale single-Xsigo switch domains and links them into a data-center-scale fabric. Combined with improvements in the software and UI, Xsigo now claims to offer one-click connection of any server resource to any network or storage resource within the domain of Xsigo’s fabric. Most significantly, Xsigo’s interface is optimized to allow connection of VMs to storage and network resources, and to allow the creation of private VM-VM links.